Knowledgebase
Online Technical Support
Software Upgrades: Please check our latest Download section.
Search Tip: You can increase the accuracy of your searches by using as many keywords as possible. Remove any common words such as "a", "or", "the" as they will be used in the search. Do not use any operands such as +, or quotation marks to enclose phrases.
|
Issue:
When Visilink is started on a Windows XP OS it halts with an error:
"TW32 An supported version of Windows NT has been detected"
Cause:
Perle Visilink V5.11 or higher runs as a compatible mode program under Windows XP.
Solution:
The following procedure should be used to run Perle Visilink V5.11 or higher as a Win2000 compatible program.
1) Go to Start program menu and right click on Visilink program.2) Go to properties.
3) Click on compatibility tab at top.
4) Select box - run this program in compatibility mode for:
5) Select Windows 2000.
6) Click apply tab.
7) Click OK to save and end.
8) Restart the Perle Visilink program and you should now obtain a signon screen to the AS/400.
Related
Articles:
1.) Affinity PCI card fails to load on Windows 2000/XP